Next job was to fit the curved window I had made earlier, because I was replacing a traditional sliding sash frame I had to fill out the reveals with 6"x 2" timbers to replace the void were the weights were.
The void left after removing the frame.
The timber infills that the frame will be fitted to.
The fitted frame, now to fit the bottom sash that is an opening sash.
I filled the remaining gaps with expanding foam.
The finished window.
Now its time to make good to the inside of the frame.
All finished, just a coat of paint required now.
All finished, just a coat of paint required now.
No comments:
Post a Comment